Product Range

Saturday, 29 October 2011


Dear All,



Gaurang Electronic Industries wishes you a very Happy Diwali & prosperous New Year accompanied by your family and friends.

We hope the New Year grants you with lots of joy, health, great moments and good business!!!

Our main objective consists of offering you good quality products, the best service, supporting long term relationship with you and your company.

In coming New Year we look forward to a growing mutual business relationship. Remember that our commitment is with you. Always.

Thanks & Regards

Bhupesh Trivedi
Cell: +91-9820424259

Gaurang Electronic Industries
(An ISO 9001-2008 Certified Company)
44, Bombay Talkies compound,
Malad (west), Mumbai - 400064. INDIA
Tel : +91-22-28824159 or +91-22-28820748.
Fax No. :+91-22-28820748
www.gaurang.com
Follow us on -

http://www.gaurang.com/images/linkedin.pnghttp://www.gaurang.com/images/facebook.pnghttp://www.gaurang.com/images/twitter.pnghttp://www.gaurang.com/images/blogger.png

Thursday, 15 September 2011

Wednesday, 14 September 2011

Din Standard Plastic Instrument Cases

Din Standard Plastic Instrument Cases


This family of Plastic instrument cases is molded in ABS plastic in one piece. These are suitable for Panel Flush mounting Analog and Digital Instruments & few are suitable for Table Top as well as plug in module. Case available with cassette, which provides mounting facilities for inside assembly as well as for front and back components. The cassette for all cases is very versatile frame assembly. The front panel plate and back plate of cassette are of plastic material hence cut out requires for mounting components like Display, Potentiometer, Thumb wheel switch or at back Terminal strip etc. can simply be punched or drilled. The Front Plates are also available with few standard cut outs. Back plate is available in plain type and with in built molded Terminal type with option of solder able terminal connector or direct pcb insertion type connectors. The two plastic front & back plates are joined by either one Metal Base plate and two Metal drilled angels, Which offers mounting facilities for PCBs, Relays, Transformers, etc. or Directly by full length pcb in case of Back plate with pcb insertion type connectors. The entire cassette when slides into the case is secured by means of screws at rear.

CASE SIZES :
( 1 ) IC - 110 : 96 x 96 x 110 mm , ( 2 ) IC - 150 : 96 x 96 x 150 mm
( 3 ) IC - 148 : 96 x 48 x 110 mm, ( 4 ) IC - 048 : 96 x 48 x 150 mm
( 5 ) IC - 072 : 72 x 72 x 110 mm, ( 6 ) IC - 192 : 96 x 192 x 200 mm
( 7 ) IC - 248 : 48 x 48 x 90 mm

Typical applications of Cases: Temperature controller, Temp. Indicator, Multipoint temp Indicator, Digital Timers, Ph. meter, Digital counters, Frequency counters, D. P. M., etc.

Universal Din Rail Enclosures / PCB Holders


Universal Din Rail Enclosures / PCB Holders



Universal Din Rail Enclosures

Universal Enclosures are distinguished by its modular design and universal mounting. It has Integral molded PCB guides for Base PCB and auxiliary Vertical & Horizontal PCBs. It also offers flexibility in I/O Terminal as fixed as well as euro terminals with customer specific configuration by knock out blanks terminal covers. Modular construction of enclosure provides ease in design and servicing of Instrument.

Features
  1. Universal mounting in all three commercially available rails. EN 60 715 TH35, TH15 and G32 DIN rails.
  2. Modular construction enables ease in design and servicing.
  3. Enclosures inside: 70 x 35/70/105/140 x 60 mm.
  4. PCBs: Base PCB and auxiliary Vertical & Horizontal PCBs
  5. PCB guides: Integral molded guides in all directions.
  6. Terminal Option: Euro 5mm pitch OR Fixed 3.75 mm pitch.
  7. Knockout blanks for individual terminal configuration in covers of Euro Terminal version
  8. Top cover available with countersunk screws as option.
The system:
Enclosure assembly consists of 35 mm Foot pieces, Spacer piece with End pieces and Top cover. Foot piece provides fixing for complete assembly by simple snap fitting on all three rails. Enclosure has Integral molded PCB guides for Base PCB and auxiliary Vertical & Horizontal PCBs.

Standard Models: - The Four standard Models in Enclosures offered are
Enclosures: - (1) UE / UEC - 035 (2) UE / UEC - 070 (3) UE / UEC - 105 (4) UE / UEC - 140

Application Of Enclosures: - Ideal for housing Electrical, Electronics & Electromechanical Devices like...Relays, Timers, Transducers, Transmitters, Sensing and Monitoring Devices.


Universal Din Rail PCB Holders

Universal Holders provides quick & easy mounting of PCBs on all three Rails. Modular design concept allows variable length of PCBs. Active & passive Interface modules used in Electrical circuits with Electronic system as one of its use.

Standard Models: - The Eight standard Models in Holders offered are
Holders: - (1) UH - 035 (2) UH - 070 (3) UH - 105 (4) UH - 140 (5) UH - 175 (6) UH - 210 (7) UH -245 (8) UH -280

Application Of Holders :- Interface modules for...Din Connectors, Sub Miniature Din Connectors, Flat Cable Connectors & Modules of Relays, Opto  coupler, Switch, Fuse, Diodes, Veristor, Power supply, Over Voltage protection, Data Transmission & Receiving, Analog / Digital Converter etc.

Profile PCB Holders

Profile PCB Holders
DIN Rail or Panel Mount

Universal mounting for 73 & 108 mm width PCB


Profile PCB Holders provides quick & easy mounting of PCBs on all three rails (35, 15, G) & Wall / Panel. It is used to mount standard 73mm and 108mm width PCBs. Profiles are available in standard 1 or 2 Meter length or it can be easily cut to required custom lengths. Profiles are also available with custom length from us with accurate cutting. The typical applications of Profile PCB Holders include Mounting custom PCB and Standard interface modules for Din Connectors, Sub Miniature Din Connectors, Flat Cable Connectors also Modules like Relay modules, Opto - coupler modules, Switch modules, Fuse modules, Diode modules, Veristor Modules, Power supply modules, Over Voltage protection modules, Data Transmission & Receiver Modules, Analog/ Digital Converter etc.

Features
  • Universal mounting in all three commercially available rails EN 60 715 TH35, TH15 and G32 DIN rails. 
  • Panel / wall Mounting 
  • For 73mm and 108mm width PCB size. 
  • Available in standard 1 meter and 2 meter extrusion length. 
  • Available with custom length & in preassembled kit form to save time 
  • Material : Profile - PVC Self-extinguishing PVC - FR -UL94V-0 & Foot / End Piece in Nylon 6.6 
  • Color Green 

Mounting of Profile PCB Holders:
DIN Rail Mounting: The Profile is mounted on DIN rail with help of 2 or more Foot Piece; It slides into grooves on the extrusion. Two End Pieces are fixed with screws on extrusion to hold PCB securely in place and to keep out foreign objects.

Panel Mounting: To panel mount, Two Panel Mont End Pieces which has an integral mounting flange with a 5.5x 7.5mm hole slot. There is no need of Foot Pieces in Panel mounting.

Note: Save time by ordering Kit with our preassembled Profile Holders, made from profile extensions cut to size and two End Sections. They can be ordered for DIN rail or panel mounting for custom length.

FUTURA DIN PLASTIC CASE


Terminals: Plug-In/Surface Mount/Wire Jumper!!!

 FUTURA Case (96x96x110mm) offers technically superior and attractive packaging to Instruments. Snap-together parts design, three innovative Terminal-to-board connection options, and high esthetical erosion-structure surface with ventilation are its distinctive features. Case manufactured in accordance with DIN 43 700 has a large variety of applications in panel flush mounting analog and digital instruments especially suitable for measuring and control technology. 

Main Features: * Snap-together design * Accommodate 4 PCBs * Snap-On latches for display PCB * 16 Terminals * Three Terminal-To-board Connection Options * Plug-In Version-leaf spring contact offers quick connection, fast replacement reduces down time * Surface Mount Version-eliminates wiring, cost effective for higher volume * Wire Jumper Version-can be custom loaded for application configuration & to reduce cost * IP-20 Protection (finger protected) snap fit Terminal Cover * Easy assembly and disassembly for servicing * Ventilation slots for effective heat dissipation * Attractive structured surface * Customized cutouts and holes possible * Panel Mounting with attractive clamps * Choice of material (plastic) & Color ABS - White, Black & Dark Gray, Polycarbonate - Fire Retardant UL 94V-0 at 1mm (Lexan-943) - White

For more detail visit

Modulbox-Dualmount-22.5


Rail Mount and Wall Mount

Designed as per DIN43 880 (MCB Type)

Modulbox-Dualmount-22.5 - a versatile, compact enclosure is ideal for housing small devises like I/O circuits, relays, timers etc. Enclosure is having wall as well as DIN rail mounting facility. It is designed as per DIN 43880 has cover face of 45mm high enables it to mount within large international style enclosures / distribution system with 45 mm cutouts like MCB.


Features
* Dimensional size per DIN 43 880 - Can be mounted with Distribution system along with MCB
* Snap-together design speeds up assembly.
* Two PCBs, Base PCB fixed on Base Plate, Vertical PCB for which cover has integral molded guides.
* Innovative Clips design facilitates Wall / Rail Mount to Enclosures by changing its position in Base plate.
* Max. 8 Terminal (4+4) - standard 5mm pitch
* Air ventilation - having slots for ventilation.
* Protection - IP20 (finger protected) Protection against accidental contact
* Terminals are optional - Enclosure supplied with / without terminals - customer can use standard commercial terminal available of their choice.

For more detail visit

Modulbox-Dualmount-70


Rail Mount and Wall Mount

Designed as per DIN43 880 (MCB Type)



Modulbox-Dualmount-70 - a versatile, compact enclosure is ideal for housing medium size control devises.  Modulbox offers wide designing option with three ways in PCB mounting and with customer specific solution in termination / connectors. Enclosure is having wall as well as DIN rail mounting facility. It is designed as per DIN 43880 has cover face of 45mm high enables it to mount within large international style enclosures / distribution system with 45 mm cutouts like MCB. Modular enclosure offers packaging to wide range of applications from Instrumentation, automotive industry to home/building automation. Typical applications are Relays, Timers, Transducers, Transmitters, Thermostat, Sensing and Monitoring Devices.

Features
* Dimensional size per DIN 43 880 - Can be mounted with Distribution system along with MCB
* Knockout blanks for individual terminal configuration
* Snap-together design speeds up assembly.
* Three PCBs provision - Base PCB fixed on Base Plate, Vertical and Horizontal PCBs for which cover has integral molded guides.
* Innovative Clips design facilitates Wall / Rail Mount to Enclosures by changing its position in Base plate.
* Max. 24 Terminal (12+12) - standard 5mm pitch fixed OR Plug-In type.
* Closed cover available for front side mating connectors like  D-sub OR for any other option.
* Air ventilation - having slots for ventilation.
* Protection - IP20 (finger protected) Protection against accidental contact.
* Terminals are optional - Enclosure supplied with / without terminals - customer can use standard commercial terminal available of their choice.

For more detail visit

Modulbox Dualmount 157


Rail Mount and Wall Mount

Designed as per DIN43 880 (MCB Type)



Modulbox-Dualmount 157  a versatile, compact enclosure is ideal for housing medium to large size control devises. Modulbox offers wide designing option with three ways in PCB mounting and with customer specific solution in termination / connectors. Enclosure is having wall as well as DIN rail mounting facility. It is designed as per DIN 43880 has cover face of 45mm high enables it to mount within large international style enclosures / distribution system with 45 mm cutouts like MCB. Modular enclosure offers packaging to wide range of applications from Instrumentation, automotive industry to home/building automation. Typical applications are PLC, Multiple Relays, Multiple Timers, Transducers, Transmitters, Thermostat, Sensing and Monitoring Devices

Features
1.       Dimensional size per DIN 43 880  Can be mounted with Distribution system along with MCB
2.       Knockout blanks for individual terminal configuration
3.       Snap-together design speeds up assembly.
4.       Three PCBs provision  Base PCB fixed on Base Plate, Vertical and Horizontal PCBs for which cover has integral molded guides.
5.       Innovative Clips design facilitates Wall / Rail Mount to Enclosures by changing its position in Base plate.
6.       Max. 56 Terminal (28+28)  standard 5mm pitch fixed OR Plug In type.
7.       Closed cover available for front side mating connectors like  D sub OR for any other option
8.       Air ventilation  having slots for ventilation.
9.       Protection  IP20 (finger protected) Protection against accidental contact
10.   Terminals are optional  Enclosure supplied with / without terminals  customer can use standard commercial terminal available of their choice.

For more detail visit



Tri-Mount Plastic Case (8/11 Pin, Rail & Wall Mount)


Tri-Mount plastic modular case offers packaging to wide range of applications from automotive industry to home/building automation because of its unique three mounting feature of 8 pin / 11 pin, DIN Rail and Wall mounting. Typical applications are Relays, Timers, Transducers, Transmitters, Thermostat, Sensing and Monitoring Devices.



Tri-Mount Case having cover dimension 43 x 78 x 76 mm is designed to have snapped together verity of base plate that offers different types of mounting to the case. Case cover has PCB Guides for two vertical PCBs and it can also accommodate with spacer a horizontal PCB ideal for holding signaling devices / indicators and switches. One type of Base plate offers 8 pin / 11 pin socket mounting facility and other type of Base plate is designed to offer Rail / Wall mounting facility. Innovative designed pair of clips can be snapped in the holes of the Base plate at two different positions. Clips snapped in to outer hole position of base plate offers Wall mounting facility and by just changing it to inner hole position it facilitate case a rail mounting option. Case is designed for customer specific solution in Termination for rail/ wall mounting application. Case Base PCB has space on both sides for terminals. Customer can use our standard lug size terminal or can use standard commercial terminals of phoenix, weidmuller, Wago, Molex and other suppliers. The structured surface with erosion-structure gives high aesthetic look to Tri-Mount Plastic Case. Customized solutions are possible like cutouts for potentiometers, switches, LED, etc. and custom colors and special markings.

VERTICAL ENCLOSURES 22.5 & 45


Rail Mount and Wall Mount




VERTICAL ENCLOSURES  22.5

Vertical DIN Rail Enclosure VE  22.5  is distinguished by its Vertical design which offers more internal volume for electronics. It is a versatile, compact enclosure is ideal for housing small devises like I/O circuits, relays, timers etc. Vertical Enclosure is having DIN rail as well as wall mounting facility. It has Integral molded PCB guides for Base PCB and auxiliary Vertical & Horizontal PCBs. It also offers flexibility in I/O euro Terminal with customer specific configuration by knock out blanks terminal covers

Features
  1. Enclosures Size Out Side: 75x22.5x123mm
  2. DIN rail EN 60 715 TH35 as well as wall mounting.
  3. Snap-together design speeds up assembly.
  4. PCBs design four types: Base PCB, Display PCB, auxiliary Vertical & Horizontal PCBs.
  5. PCB guides: Integral molded guides in all directions.
  6. Max. 8 Terminal (4+4) standard 5mm pitch fixed OR Plug-In type.
  7. Knockout blanks for individual terminal configuration
  8. Terminals can be mounted on Base PCB as well as vertical PCBs
  9. Terminals are optional  Enclosure supplied with / without terminals. Customer can use any make 5mm pith terminals.
  10. Protection - IP20 (finger protected) Protection against accidental contact
  11. Customization : Cutout / holes in Top cover front plate possible

VERTICAL ENCLOSURES  45

Vertical Enclosure VE  45  is distinguished by its Vertical design which offers more internal volume for electronics. It is a versatile, compact enclosure is ideal for housing Electrical, Electronics & Electromechanical small devises like I/O circuits, relays, timers, transducers, transmitters, Sensing and Motoring Devices. Vertical Enclosure is having DIN rail as well as wall mounting facility. It has Integral molded PCB guides for Base PCB and auxiliary Vertical & Horizontal PCBs. It also offers flexibility in I/O euro Terminal with customer specific configuration by knock out blanks terminal covers.

Features
  1. Enclosures Size Out Side: 75 x 45 x 123 mm
  2. DIN rail EN 60 715 TH35 as well as wall mounting.
  3. Snap-together design speeds up assembly.
  4. PCBs design four types: Base PCB, Display PCB, and auxiliary Vertical & Horizontal PCBs.
  5. PCB guides: Integral molded guides in all directions.
  6. Max. 16 Terminal (8+8) standard 5mm pitch fixed OR Plug-In type.
  7. Knockout blanks for individual terminal configuration
  8. Terminals can be mounted on Base PCB as well as vertical PCBs
  9. Terminals are optional  Enclosure supplied with / without terminals. Customer can use any make 5mm pith terminals.
  10. Protection  IP20 (finger protected) Protection against accidental contact
  11. Customization : Cutout / holes in Top cover front plate possible 

The Syatem

Terminal to board connection options: Terminal of euro 5mm pitch fixed type OR Plug In type can be mounted on either Base PCB or on auxiliary Horizontal PCBs.

Knock Out Blanks for Individual Terminal Configuration:  Enclosure Top Cover is a closed cover with Knock out blanks. The openings for Terminals on top and side are achieved by knocking out blanks as per terminal configuration. This feature gives enclosure tailored made enclosure look and allows use of terminals only as per requirement without any wastage thereby saving in terminal cost.

For more detail visit

COLLET KNOBS & PCB CARD GUIDES


COLLET KNOBS & PCB CARD GUIDES



COLLET KNOBS

Collet knobs are distinguished by their styling elegance, easy handling, long life, perfect fit on the shaft as a result of clamping chuck mounting (collet) and by their comprehensive accessories in different colours. Due to modular construction it has interchangeability and easy assembly of the knob body. Different colour caps, pointers, nut covers and marked dials can be simply plugged on the knob body. Knobs are available in three colours and caps and pointers are in seven colours. With this operating functions are better defined. Hence the large numbers of combination can be made. Different collet sizes are available to suit the different shaft diameter of potentiometers & Band switches of different makes and designs. 6.35 mm (1/4 "), 6 mm & 4 mm. are standard shaft diameter used.


POINTER KNOBS
New styled matt finish pointer knobs are designed to provide better hand grip on the knobs. Like standard knobs and wing knobs, pointer knobs are also having modular construction.


PCB CARD GUIDES


CCCG-3/4
These card guides are for use in standard 19" Rack systems. The molded in fingers act as pressure pads to withstand vibration. It has snap fixing facility needs no mounting hardware. Available in Engineering Thermoplastic ABS and polycarbonate material.


CCCG-44
These are for rack chassis and are having fixing tabs. Available in ABS


CCCG-11
These are for mounting P. C. card 1/ 16", thick Guide. It has antirotation dowel and fixing screw, available in ABS.